RSM of a single thin type hydraulic cylinder | ●Flat design is suitable for narrow space work demand. ●The base screw hole for fixing. ●Groove type main shaft surface, without adding a cushion block. ●The main shaft and the inner wall of the hydraulic cylinder wear-resistant hard chromium treatment,corrosion resistance. ●A strong spring spindle retracting speed acceleration. ●Dustproof ring to reduce pollutant attachment. ●The spindle nut protection over elongation. ●Anti rust paint appearance, surface corrosion resistance. ●All models are 3/8NPT containing a quick joint and a dustproof cover. |
RCS The role of a single low type hydraulic cylinder | ●Light and substrate is low, but the lift requirements than RSM high, suitable for this series. ●Groove type spindle surface with screw tooth holes for easy installation tilt pad(optional). ●The main shaft and the inner wall of the hydraulic cylinder wea ●A strong spring spindle retracting speed acceleration.r-resistant hard chromium threatment,corrosion resistance. ●Dustproof ring to reduce pollutant attachment. ●The spindle nut protection over elongation. ●Anti rust paint appearance, surface corrosion resistance. ●All models are 3/8NPT containing a quick joint and a dustproof cover. |
Model No. | Cylinder Capacity (ton) | Stroke (mm) | Cylinder Effective Area (cm2) | Oil Capacity (cm3) | Collapsed Height A(mm) | Extended Height B(mm) | Outside Diameter D(mm) | Outside Diameter E(mm) | Plunger Diameter F(mm) | Saddle protrusion form Plunger K(mm) | Spindle thread O(mm) | Depth of thread P(mm) | Bolt Circle U(mm) | Wight (kg) |
| RSM-50 | 5 | 6 | 6.5 | 4 | 32 | 38 | 58×41 | 28.7 | 25.4 | 1 | – | – | – | 1.0 |
| RSM-100 | 10 | 12 | 14.5 | 18 | 43 | 54 | 82×55 | 42.9 | 38.1 | 1 | – | – | – | 1.4 |
| RSM-200 | 20 | 11 | 28.7 | 32 | 51 | 62 | 101×76 | 60.5 | 50.8 | 1 | – | – | – | 3.1 |
| RSM-300 | 30 | 13 | 42.1 | 55 | 58 | 71 | 117×95 | 73.2 | 63.4 | 2 | – | – | – | 4.5 |
| RSM-500 | 50 | 16 | 62.1 | 99 | 66 | 82 | 140×114 | 88.9 | 69.8 | 2 | – | – | – | 6.8 |
| RSM-750 | 75 | 16 | 102.6 | 164 | 79 | 95 | 165×139 | 114.3 | 82.6 | 2 | – | – | – | 11.3 |
| RSM-1000 | 100 | 16 | 126.7 | 203 | 85 | 101 | 178×153 | 127.0 | 92.2 | 2 | – | – | – | 14.5 |
| RSM-1500 | 150 | 16 | 198.1 | 317 | 100 | 116 | 215×190 | 158.8 | 114.3 | 2 | – | – | – | 26.3 |
Model No. | Cylinder Capacity (ton) | Stroke (mm) | Cylinder Effective Area (cm2) | Oil Capacity (cm3) | Collapsed Height A(mm) | Extended Height B(mm) | Outside Diameter D(mm) | Outside Diameter E(mm) | Plunger Diameter F(mm) | Saddle protrusion form Plunger K(mm) | Spindle thread O(mm) | Depth of thread P(mm) | Bolt Circle U(mm) | Wight (kg) |
RCS-101 | 10 | 38 | 14.5 | 55 | 88 | 126 | 69 | 42.9 | 38.1 | 5 | M4 | 8 | 26 | 4.1 |
RCS-201 | 20 | 45 | 28.7 | 129 | 98 | 143 | 92 | 60.5 | 50.8 | 3 | M5 | 8 | 39 | 5.0 |
RCS-302 | 30 | 62 | 42.1 | 261 | 117 | 179 | 101 | 73.2 | 66.5 | 3 | M5 | 8 | 39 | 6.8 |
RCS-502 | 50 | 60 | 62.1 | 373 | 122 | 182 | 124 | 88.9 | 69.8 | 2 | M5 | 8 | 39 | 10.9 |
RCS-1002 | 100 | 57 | 126.7 | 722 | 141 | 198 | 165 | 127.0 | 92.2 | 1 | M8 | 10 | 55 | 22.7 |