●Hydraulic system components
SW-700 | Control valve Neutral oil return, four three level positioning,locking. Suitable for single or double action hydraulic cylinder, "Forward, maintain, reply" action. | V66 | Safety lock valve When the hydraulic cylinder is retracted to manually open the oil tank, Single acting and double action hydraulic cylinder are applicable. Similar to V-66, but is used to control the flow of very fine precision Measurement capability. |
SVM-S2 | Control valve Three two the manual directional valve,"Going forward, reply" action, It can be used with jack. | V-82 | Needle valve 3/8 "-18NPTF female connector, Can control the speed of hydraulic cylinder, Also as a shut-off valve for maintenance. |
SVM-D4 | Control valve Four three the manual directional valve, Neutral oil, level of locking and positioning, "Going forward, maintain, reply" action, With the use of double action jack or two single action jack. | V-42 | Hydraulic control valve When the hydraulic system pressure decreases, installed in the jack can maintain the load. Is usually double action jack with the use of bear jack on the back of oil T joint pressure. 3/8 NPTF female connector holes. A one-way valve compression ratio of 14% (6.5:1) |
VR-D4 | Control valve Four three the manual directional valve, Neutral oil level locking positioning, "Forward, maintenance, recovery action, With the use of double action jack or two single action jack. | BP2 | 700bar;17l/min. Manual, two position, oil/oil return for the use of monoculture oil cylinder |
●Hydraulic oil
SAGF10 high wear resistance of hydraulic oil (low temperature area is applicable)
● The main components of high quality base oils and selected additives mixed.
● Ingredients include hydraulic oil HL, in full compliance with the DIN51525 51524 standard.
● Contains antioxidant, anti rust, anti abrasion and anti foam additive.
● To reduce the low load pump in continuous use, produce viscous damage caused by air bubble.
● Mainly applicable to oil control and hydraulic transmission system, also applies to some mechanicalcirculation or
oil bath system.
Special hydraulic oil SA22/32/46/68/100/150
● With special additives, prevent oil oxidation, reduce the wear of metal and foam formation, increase the life of
hydraulic oil and protection.
● With hydraulic high viscosity index of excellent quality of the pan of oil, antioxidant, anti-wear, anti rust water,
defoaming additives, prevent oxidation and acid damage.
● Easy separation and water circulation system, can keep the oil clean, prolong the service life of the machine.
● The use of high pressure hydraulic machinery, injection molding machine, large hydraulic press in the system
is suitable for a variety of industrial.
Model No. | ISO | g/ml | Viscosity 40℃ | Viscosity 100℃ | Viscosity Index | C.O.O ℃ | Pour point ℃ |
SA22-4L | 22 | 0.868 | 22.2 | 4.4 | 107 | 200 | -21 |
SA32-4L | 32 | 0.872 | 32.1 | 5.5 | 107 | 205 | -22 |
SA46-4L | 46 | 0.874 | 46.7 | 6.9 | 103 | 216 | -24 |
SA68-4L | 68 | 0.879 | 68.9 | 9.0 | 105 | 221 | -26 |
Model No. | ISO | g/ml | Viscosity 0℃ | Viscosity 40℃ | Viscosity 100℃ | Viscosity Index | C.O.O ℃ | Pour point ℃ |
SAGF10-4L | 10 | 0.855 | 50 | 10 | 2.8 | 98 | 160 | -39 |
SAGF10-5L | 10 | 0.855 | 50 | 10 | 2.8 | 98 | 160 | -39 |
Copyright:Shanghai Cen Nuo Machinery Co. Ltd.